luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis 17.25 (438) 20 (508) 1 6 5 4 3 2 materials scirocco is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. the top cast aluminum housing is designed with a hinged mechanism. the hard aluminum shade assembly is designed with a set of perimeter reinforcement ribs. the inner surface is standard white enamel for higher light efficiency. the lower optical assembly includes sealed borosilicate prismatic glass diffuser, secured with a silicone memory retention gasket. the diffuser is enclosed in a star ribbed one piece cast aluminum cage. electrical high i ntensity disch arge (h.i.d) ballast electronic 120/277v multi volt, or 347v (50-60hz) with a minimum starting temperature of -30oc/-20of, including end of life protection. socket medium base pulse rated 4kv porcelain body with a nickel plated screw shell, and center contact rated 600v. supplied with 200c leads. c ompact fluorescent (cfl) ballast 120/277v-50/60hz multi volt or 347v electronic ballast with end of life protection. minimum starting temperature of 0of/-18oc socket thermoplastic body rated for 75w-600v. supplied with 105c leads. finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight: 18lbs (8.2kg) scirocco is designed as a modular luminaire concept offering a selection of mounting arrangements for various architectural requirements. pole, wall or suspended attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. ce certification on request. rated ip65. 7 luminous opening epa: 0.75 SR360 series scirocco - hid/cfl jan 2014 r ev 0 1 SR360t 1- cast aluminum ballast housing. 2- universal ballast tray with twist lock design. 3- sealed and isolated lamp compartment. 4- housing/shade assembly hinge mechanism. 5- borosilicate prismatic heavy glass diffuser. 6- set of cast aluminum louver rings. 7- structurally reinforced perimeter aluminum shade. inner surface is standard white enamel for increased light performance. access to lamp and ballast scirocco is designed for ease of access to electrical and lighting compartment with a unique hinge mechanism concept. type: quantit y: project: catalog number: fixtu re watta ge volta ge finish option option option option luminis.com
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis SR360 series scirocco - hid/cfl jan 2014 r ev 0 2 the cosmopolis tm system offers a step-dimming option. the ballast will dim the 90w and 140w lamps to 60 % lamp power. the ballast calculates the mid-point of the evening, which is the starting point for 6 hour lumistep tm . 8 or 10 hours lumistep tm available on request. * cosmopolis tm and lumistep tm are registered trademarks of royal philips electronics. mounting electrical accessories aca pole mounted attachment with 45o support acw wall mounted attachment with 45o support apa pole mounted shepherd arm attachment apc pole mounted straight arm attachment aps post top shepherd arm attachment cat catenary suspension attachment w wall mounted shepherd arm attachment t wall mount straight arm attachment stm 36 field-cuttable stem with 45o swivel (other lengths available, please specify) spg silver braided power cord with adjustable suspension cable. 36 in length (other lengths on request). sc safety cable extends 18 over mounting plate (with stem mounting only) ssc stabilizer cables hs house shield installed within the glass diffuser fs fuse 3 ph photocell 3 qs 120v max. 100w bayonet lamp base for emergency external power 4 qrs quartz lamp standby restrike. max. 100w bayonet lamp. 120-277v 5 options for details please refer to next pages notes 1- unless otherwise noted, lamps are by others. 2- luminaires are factory prewired for 120v (if no voltage is specified.) for other voltages, please specify with catalog number, or consult factory. 3- fuse and photocell options are normally installed with poles when specified with luminis luminaires. (except for other types of mounting.) 4- qs option requires a separate 120v emergency external power line. 5- qrs option requires a 120/277v line. 6- high pressure sodium sources are available on request. descriptive information total lms: 5600 lumens total input watts: 82 w lamps: ed17/coated metal halide total efficiency: 52% bug rating: b1-u3-g1 cutoff classification: non-cutoff distribution: type v outdoor report polar graph maximum candela = 401 cp SR360-m70 please visit our web site www.luminis.com for complete i.e.s. formatted download data. typical photometry summary standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne o ptional colors cs custom color ral ral# color (refer to color chart) 120v 277v 347v 120v 277v 120v 277v 347v model# lamp selection 1 voltage 2 finish SR360 luminaire selection met al halide 6 ed lamp type m50e ansi m110 m70e (ed17/e26 base) ansi m98/m139/m143 m100e ansi m90/m140 m150e ansi m102/m142 compact fluorescent single lamp f132 1x32w f142 1x42w f157 1x57w (gx24q) two lamps f232 2x32w f242 2x42w cosmopolis tm lighting system (includes lamp) m60c m90c (t6/pgz12 base) 2800k, 70cri m140c 90w/140w 277v only } optional cosmopolis tm lumistep tm dimming lm60 (60w step dimming ballast - 6 hours) lm90 (90w step dimming ballast - 6 hours) lm140 (140w step dimming ballast - 6 hours) 100 200 401 300 luminis.com
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis SR360 series scirocco - hid/cfl jan 2014 r ev 0 3 paa pole series psb pole series pst pole series ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 pst10 ------- psb10 10 ft. (3 m) paa412 paa512 pst12 ------- psb12 12 ft. (3,6 m) paa414 paa514 pst14 ------- psb14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb16 16 ft. (4,8 m) paa418 paa518 ------- pta18 psb18 18 ft. (5,5 m) paa420 paa520 ------- pta20 psb20 20 ft. (6,0 m) ------- ------- ------- pta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matching pole selection 16 (406) 28 (711) 10.75 (273) 22.5 (572) 4.25 (108) power feed 31 (787) 30 (762) 17.75 (451) aca 1 1 x 3 extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) apc 1 x 3 extruded aluminum side pole mounting straight adaptor (epa: 0.12) aps 1 5/8 dia. shepherd aluminum post top mount, with a cast aluminum tenon to fit with a 3 3/4 i.d. pole. (epa: 0.15) apa 1 1 5/8 dia. shepherd aluminum side pole mount. (epa: 0.15) note 1 : pca pole with aca and apa attachments require a 30 (762) tenon extension over pole nominal height. factory installed. power feed pole mount luminis.com
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis SR360 series scirocco - hid/cfl jan 2014 r ev 0 4 18.25 (463) 14.5 (368) 14 (356) 13.5 (343) 3 (76) 4 . 6 2 5 (118) power feed 8.5 (216) 4.25 (108) 1 (25) 6.25 (159) 27 (686) power feed t 1 x 3 extruded aluminum wall mounting straight adaptor with cast aluminum cover and galvanized steel mounting plate. 4 . 6 2 5 (118) 3 (76) 1 7 . 7 5 (451) power feed 3 (76) 4 . 6 2 5 (118) power feed 6 . 1 2 5 (156) wall mount c atenary suspension ceiling pendant mount acw 1 x 3 extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. cat attachment includes a sealed cast aluminum connection box with (2) 1/2 sealed connectors for armored power cable (by others). ready to accept 1/4 stainless steel suspension cable (by others). stm 36 lg. (914) stem with 45o swivel ceiling mount ? 5/8 (16) aluminum suspension stem. luminaire top swivel adaptor allows to cut stem to length on site. (mounts over a standard 4 octagonal box with 3 1/2 c/c holes) spg 4/18 silver braided power cable, with stainless steel adjustable cable. standard 36 lg. (914). other lengths available on request. ssc set of three stabilizer cables w 1 5/8 dia. shepherd aluminum arm wall mount, with a cast aluminum wall cover and galvanized steel mounting plate. mounting mounting mounting 36 (915) stm spg stem ssc luminis.com
|
